| 2003 Sahni, A: “Transition from ISO9001: 1994 to ISO9001:
2000,” Monthly ASQ Minnesota Section, February 11, 2003, Minneapolis, MN.
Sahni, A: “Sampling Plans,” HealthPack 2003,
March 27-28, 2003, Scottsdale, AZ.
Sahni, A: “Risk Analysis and Risk Management: Meeting
The Challenge,” 17th BioMedical Focus Conference and Exposition, April
14-16, 2003, Minneapolis, MN.
1997
Sahni, A: “Seven Basic Tools That Can Improve
Quality,” Medical Device and Diagnostic Industry Transaction, September 1997.
See also Medical
Device & Diagnostic Industry Magazine (April 1998)
Sahni, A: “Analytical Tools to Assure Device
Safety,” Biomedical Focus 11th Annual Conference and Exposition, July
28-30, 1997, Minneapolis, MN.
Sahni, A., Costabilo, F., Kim John: “Post Market
Analysis of Medical Devices,” Biomedical Focus 11th Annual Conference and
Exposition, July 28-30, 1997, Minneapolis, MN.
1996
Sahni, A.: “Risk Analysis and Management,”
Biomedical Focus 10th Annual Conference and Exposition, July 15-17, 1996, Minneapolis, MN.
Sahni, A., Larsen, C: “Meeting FDA Process Validation
Requirements,” Medical Device and Diagnostic Industry Transactions, July 1996.
Sahni, A., Gaertner, C.: “Conducting Cost-Benefit
Analysis of Implementing Total Quality,” Medical Device and Diagnostic Industry
Transactions, May 1996.
1995
Sahni, A. Larsen, C.: “A Process Validation Case
Study,” ASQC Biomedical Division Conference, December 4-6, 1995, Kansas City,
MO.
Sahni, A., Larsen, C.: “A Process Validation Case
Study,” ASQC Biomedical Division Conference, October 18-20, 1995, San Jose, CA.
Sahni, A., Larsen, C.: “A Process Validation Case
Study,” Medical Design and Manufacturing Regional 95 Conference and Exposition,
September 19-21, 1995, Orlando, FL.
Sahni, A.: “Conducting a Hazard Analysis for a Medical
Device.” Medical Alley Clinical Studies Committee, September 13, 1995, Minneapolis,
MN.
Sahni, A.: “Implementing Reengineering with the TQM
Process.” Biomedical Focus Ninth Annual Conference and Exposition, July 31, August
1-2, 1995, Minneapolis, MN.
Sahni, A., Rastogi, A.: “Implementing Re-Engineering
with the TQM Process,” 39th EOQ Congress, June 12-16, 1995, Lausanne,
SWITZER LAND.
Sahni, A., Rastogi, A.: “Total Quality Through
Leadership,” AQC 49th Quality Congress, May 22-24, 1995, Cincinnati,
OH.
Sahni, A.: “Reducing Product Development Time,”
The Journal of Applied Manufacturing Systems, St. Thomas Technology Press, Spring, 1995.
Sahni, A.: “The Importance of FMEA,” ASQC
Minnesota Section Monthly Meeting, March 14, 1995, Minneapolis, MN.
Sahni, A., Rastogi, A.: “Transforming Corporate
Culture Through Total Quality Commitment,” WCTQ95/QUALEX 95, February 8-11, 1995, New
Delhi, INDIA.
Sahni, A., Rastogi, A.: “FMECA – A Tool to
Achieve Robust Designs,” WCTQ95/QUALEX 95, February 8-11, 1995, New Delhi, INDIA.
Sahni, A.: “Using Reengineering Concepts to Improve
Quality Systems,” Medical Device and Diagnostic Industry Transactions, January
1995.
1994
Sahni, A., Rastogi, A.: “Generating the
Right Quality Chemistry for the Nineties,” QUALCON ’94, November 13-16, 1994,
Melbourne, AUSTRALIA.
Sahni, A.: “Quality Improvement in Product
Design,” QUALCON ’94, November 13-16, 1994, Melbourne, AUSTRALIA.
Sahni, A.: “Total Quality Commitment Through
Leadership,” ASQC Minnesota Section Monthly Meeting, October 11, 1994, Minneapolis,
MN.
Sahni, A., Kim, J.: “Reliability Assessment of
Mechanical Joints,” ASQC 48th Annual Quality Congress, May 24-26, 1994,
Las Vegas, NV.
Sahni, A, Kim, J.: “Improving Process Quality Through
Trend Analysis,” Medical Device and Diagnostic Industry Transactions, January 1994.
1993
Sahni, A.: “Using FMEA to Improve Manufacturing
Processes,” Medical Device and Diagnostic Industry Transactions, July 1993.
Sahni, A., Kim, J.: “Designing A Post-Market
Surveillance Program,” World Quality Congress ‘ 93, June 14-18, 1993, Helsinki,
FINLAND.
Sahni, A.: “Design Verification of Biomedical
Devices,” Medical Design and Manufacturing East Conference and Exhibition, May 25-27,
1993, New York, NY.
Sahni, A., Kim, J., Keenan, T.: “Designing a
Post-Market Surveillance Program,” Medical Design and Manufacturing West Conference
and Exhibition, January 25-27, 1993, Anaheim, CA.
Sahni, A., Kim, J.: “FMEA-A Powerful Tool to Improve
Design Quality,” Quality Through Engineering Design Conference, January 11-14, 1993,
Banglore, INDIA.
1992
Sahni, A.: “Cutting Waste to Reduce Product
Development Time,” Medical Device and Diagnostic Industry Transactions, October 1992.
Sahni, A., Kendall, J.: “Statistical Process Control-A
Valuable Tool for Quality Improvement of Molded Plastic Parts for Biomedical
Devices,” ANTEC ‘92- June 1992, Pages 722-723, A Journal of the Society of
Plastic Engineers.
Sahni, A.: “Design Verification,” ASQC/FDA
Medical Device Conference, June 8-10, 1992, Chicago, IL.
Sahni, A.: “Design Transfer From R&D to
Production,” ASQC/FDA Medical Device Conference, June 8-10, 1992, Chicago, IL.
Sahni, A.: “Quality Chemistry for the Nineties,”
39th Annual ASQC Minnesota Quality Workshops and Conference, March 1992,
Minneapolis, MN.
Sahni, A., Kim, J., Mattson, L.: “Modeling and
Simulation for Reliability Prediction of Implantable Cardiac Pacemakers,” Annual
Reliability and Maintainability Symposium, January 21-23, 1992, Las Vegas, NV.
1991
Sahni, A.: “How to Conduct a Failure Mode and Effects
Analysis,” Medical Device and Diagnostic Industry Transactions, October 1991.
Sahni, A., Johnson, B.: “Continuous
Improvement-Auditing in the Nineties,” 35th EOQ Annual Conference, June
13, 1991, Prague, CZECHOSLVAKIA.
Sahni, A., Mattson, L., Kim, J.: “Measuring Field
Performance of Medical Devices,” 45th Annual Quality Congress, May 20-22,
1991, Milwaukee, WI.
Sahni, A.: “Designing Quality In,” Medical Design
and Material Conference, April 23-25, 1991, Meadowland, NJ.
Sahni, A.: “Failure Mode and Effects Analysis,”
Biomedical Trends 1991 Conference and Mini-Workshops, April 8-11, 1991, Bethesda, MD.
Sahni, A.: “Design Reviews-How to Realize Their Full
Benefits,” 38th Annual ASQC Minnesota Quality Workshops and Conference,
March 5-6, 1991, Minneapolis, MN.
Sahni, A., Kim, J., Mattson, L.: “Measuring Field
Performance of Medical Devices,” 38th Annual ASQC Minnesota Quality
Workshops and Conference, March 5-6, 1991, Minneapolis, MN.
Sahni, A.: “Product Testing and Evaluation,”
Medical Design and Manufacturing West Conference and Exhibition, January 23-25, 1991,
Anaheim, CA.
1990
Sahni, A., Kim, J.: “Quality Management
Strategies,” Medtronic Technology Conference, October 8, 1990, Minneapolis, MN.
Sahni, A.: “Role of Standards in a Company’s
Quality Program,” 39th Annual Conference of the Standards Engineering
Society (SES), September 24-26, 1990, Minneapolis, MN.
Sahni, A.: “Failure Analysis Techniques,”
Biomedical Trends 1990 Conference and Mini-Workshops, September 17-19, 1990, Denver,
CO.
Sahni, A.: “Quality in Device Design,” First
World Congress of Health Technology Standards, August 26-29, 1990, Dublin, IRELAND.
Sahni, A., Kim, J.: “Detailed FMECA of a Pacing
Lead,” International Symposium on Reliability and Maintainability, June 5-8, 1990,
Tokyo, JAPAN.
Sahni, A., Kim, J.: “Reliability Modeling for
Determination of Warranty Strategy for a Medical Device,” International Symposium on
Reliability and Maintainability, June 5-8, 1990, Tokyo, JAPAN.
Sahni, A., Kim, J.: “Detailed FMECA of a Biomedical
Device,” 44th Annual Quality Congress, May 14-16, 1990, San Francisco, CA.
Sahni, A.: “Changing role of a QA
Professional-Challenge for Tomorrow,” 37th Annual Minnesota State Quality
Conference, April 10-11, 1990, Minneapolis, MN.
Sahni, A., Kim, J: “Generating the Right Quality
Chemistry for the Nineties,” Medtronic Science and Technology Conference, March 1,
1990, Minneapolis, MN.
Sahni, A., Kim, J., Mattson, L.: “Estimation of Field
Performance of Implantable Medical Products,” Medtronic Science and Technology
Conference, March 1, 1990, Minneapolis, MN.
Sahni, A.: “Failure Analysis (FTA),” Biomedical
Focus Conference, February 5-7, 1990, Orlando, FL.
Sahni, A., Kim, J., Mattson, L.: “Verification of
Design Quality Through Statistical Analysis,” American Statistical Association Winter
Conference, January 4-6, 1990, Orlando, FL.
Sahni, A., Kim, J., Mattson, L.: “Estimation of Field
Performance of Implantable Medical Products,” American Statistical Association Winter
Conference, January 4-6, 1990, Orlando, FL.
1989
Sahni, A.: “Developing a Process Validation
Protocol,” HIMA/FDA Process Validation Workshop, November 8, 1989, Washington D.C.
Sahni, A.: “Fault Tree Analysis of Implantable
Leads,” 33rd European Quality Congress, September 18-21, 1989, Vienna,
AUSTRIA.
Sahni, A.: “Process Validation – A Case
Study,” Biomedical Focus III, July, 1989, Bloomington, MN.
Sahni, A., Kim, J.: “Predicting Performance of
Implantable Pulse Generators,” 4th European Symposium on Cardiac
Pacing,” May 28-31, 1989, Stockholm, SWEDEN.
Sahni, A. Kim, J.: “Comparing Actual vs. Predicted
Reliability of Implantable Pacemakers,” Advances in Reliability and Quality Control,
Pages 1-5, A publication of International Association of Science and Technology for
Development, Acta Press, March, 1989, Calgary, Alberta, CANADA.
Sahni, A.: “Quality Function Deployment,” Meeting
of ASQC Minnesota Section, September 1989, Minneapolis, MN.
Sahni, A.: “Continuous Improvement-Auditing in the
Nineties,” 36th Annual Minnesota Quality Conference, March 1989,
Minneapolis, MN.
Sahni, A., Kim, J., “Construction of A-1 Chart in a
QFD Case Study,” Medtronic Science and Technology Conference, March 1989,
Minneapolis, MN.
Sahni, A.: “Affinity Diagramming Process Using Post-It
Pads,” Minnesota Council for Quality Conference, St. Paul, MN.
1988
Sahni, A.: “FMEA-A Tool to Improve Design
Quality,” 5th Goal/QPC Annual Conference, November 1988, Boston, MA.
Sahni, A.: “Improving Customer Satisfaction With
Superior Quality,” 43rd Midwest Quality Conference, October 1988, Chicago,
IL.
Sahni, A.: “Actual vs. Predicted Performance of
Pacemakers,” 1988 ASQC Quality Congress Transactions, Pages 142-146, Dallas, TX.
Sahni, A.: “Fault Tree Analysis and Its
Application,” ASQC Monthly Meeting, February 1988, Minneapolis, MN.
1987
Sahni, A., Stokes, K., Lesser, J., Staffanson, D.: “A
Possible New Complication of Sub-Clavian Stick: Conductor Fracture,” VIIIth World
Symposium on Cardiac Pacing and Electrophysiology, Jerusalem, ISRAEL.
Sahni, A., Myrum, S.: “Fault Tree Analysis of
Implantable Leads,” 1987 ASAQC Quality Congress Transactions, Pages 491-496,
Minneapolis, MN.
Sahni, A.: “Measuring Customer Satisfaction in the
Health Care Industry,” 42nd Midwest Quality Conference, October 1987,
Kansas City, MO.
1986
Sahni, A., Myrum, S.: “Reliability Prediction of
Implantable Leads,” 1986 ASQC Quality Congress Transactions, Pages 162-167, Anaheim,
CA.
Sahni, A.: “Reliability Emphasis – The Changing
Scenes,” 34th Annual Minnesota Quality Conference, March 1986,
Minneapolis, MN.
1985
Sahni, A.: “Verifying Reliability With Small Sample
Sizes,” 33rd Annual Minnesota Quality Conference, March 1985, Minneapolis,
MN. |
